2006-2013 BMW 1-SERIES E8X WOOD TRIM

BMW 1-Series Alcantara Wood Trim

Refresh your E82/E88 interior with custom-made Alcantara-wrapped wood trims built on genuine BMW cores. Direct OEM replacement fitment, no guesswork, no flimsy stick-ons.

Part Numbers

• Dashboard decorative strip (I-panel), Poplar Grey: 51 45 9 121 704 (ECS, Turner)
• Front door decorative strip – Left: 51 41 9 140 361 (aka 9140361) (recycleBMWs)
• Front door decorative strip – Right: 51 41 9 140 362 (aka 9140362) (recycleBMWs)
• Center console shifter surround (wood, Fineline/Poplar): 51 16 9 121 716 (listing cites 51169121716) — and variant 51 16 9 278 770 (Fineline Anthracite) (ML Performance)
• (Common kit identifier seen in seller catalogs: 51 16 9 121 710 — set/assembly reference) (Prussian Motors)

Compatibility with other chassis'

• E82 (Coupe) & E88 (Convertible) 2008–2013: All parts above are native fitments depending on transmission/trim finish options.
• E81/E87 (Hatchback): Door wood strips (51419140361/362) are listed across E81/E82/E87/E88 in dismantler/ETK-mirrored catalogs; verify clip pattern before ordering for hatchbacks (example cross-listing).
• Finish/option notes: BMW offered Poplar Grey (S4ASA) and Fineline Anthracite variants; center console/shifter surround may differ by finish and iDrive/shift layout (hence 51169121716 vs 51169278770). Check your option code and console layout against the part diagram links above.

Custom Alcantara, Forged Carbon Fiber, Carbon Fiber, Nappa Leather

Each core is an OEM BMW trim piece that we re-finish in your choice of premium materials—Alcantara, Forged Carbon, traditional Carbon Fiber, or Nappa Leather. Because the geometry and clips remain OEM, installation is a direct swap. Your order is built to spec (color, stitch, weave, or matte/gloss topcoat), then QC’d for fit and finish before shipping.

Installation tools needed

• Plastic trim wedge set (non-marring)
• T20 Torx driver (door and console fasteners)
• 7–8 mm nut driver/socket (console fasteners, as equipped)
• Small pick or hook tool (release clips carefully)
• Microfiber towels + isopropyl alcohol (wipe mating surfaces)
• Optional: painter’s tape to protect adjacent panels

OEM+ parts, Direct swap of OEM parts

All listed parts are genuine BMW cores and remain OEM-spec for fitment. Our finish work is custom, but installation uses factory clips and holes—no cutting or drilling required.